Ais Filter; User Map; User Map; Non-Selected Object - JRC JMR-5410-4X Instruction Manual

3.15.5 AIS filter

Sector
(Start angle)
* The section other than the
sides of the sector is not
targeted for selection.
[Sector (start angle)]
When Sector (start angle) is clicked on, the cursor is set to the Sector (start/end angle) change mode.
[Sector (end angle)]
When Sector (end angle) is clicked on, the cursor is set to the Sector (end angle) change mode.
[Ring]
When Ring is clicked on, the cursor is set to the Ring change mode.
Memo
The values of Sector (start angle) and Sector (end angle) indicate relative bearings based on the
ship's heading as the standard.

3.15.6 User map

The operation of an object in the unselected state is different from that of an object in the selected
state.

3.15.6.1 Non-selected object

When an object created on the user map is clicked on, the object is selected and the property screen of
the object is displayed.
Section 3 Common Basic Operations
Own ship
Ring
3-30
Sector
(End angle)