Standard Rs-232C Port; About The Rs-232C Port; Confirmation With Epson Rc+ 7.0 - Epson RC90 Manual

Setup & Operation 10.

10. Standard RS-232C Port

10.1 About the RS-232C Port

A standard RS-232C port is available with the Controller.
Mount the RS-232C board(s) in the option slot to communicate with external equipment
with two or more RS-232C ports.
For the details of the expansion port, refer to Setup & Operation 13.4 RS-232C Board.
Port numbers are assigned as follows.

10.2 Confirmation with EPSON RC+ 7.0

When an RS-232C board is mounted in as option unit, the Controller software
automatically identifies the RS-232C board. Therefore, no software configuration is
needed. Correct identification can be confirmed from EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Setup]-[System Configuration] to display the
(2)
50
Standard RS-232C Port
Port No.
#1 Standard RS-232C connector
#2 First expansion RS-232C board CH1
#3 First expansion RS-232C board CH2
#4 Second expansion RS-232C board CH1
#5 Second expansion RS-232C board CH2
[System Configuration] dialog.
Select the [RS232]-[RS232].
Supported hardware
RC90 (EPSON RC+ 7.0) Rev.8