Epson RC90 Manual page 173

No. Message
3268 Form name was not specified.
Property Name or Control Name was
3269
not specified.
3270 Property Name was not specified.
3271 BackColorMode was not specified.
3272 BorderStyle was not specified.
3273 DropDownStyle was not specified.
3274 EventTaskType was not specified.
3275 ImageAlign was not specified.
3276 IOType was not specified.
3277 FormBorderStyle was not specified.
3278 ScrollBars was not specified.
3279 SizeMode was not specified.
RC90 (EPSON RC+ 7.0) Rev.8
Remedy
Form name is not specified in GSet,
GGet, GShow, GShowDialog, and
GClose statements. Specify a form
name.
Property name or control name is not
specified in GSet and GGet statements.
Specify a property name or control
name.
Property name is not specified in GSet
and GGet statements. Specify a
property name.
BackColorMode property setting value is
not specified in GSet statement. Refer
to GUI Builder 7.0 manual
"BackColorMode Property" and specify
a proper setting value.
BorderStyle property setting value is not
specified in GSet statement. Refer to
GUI Builder 7.0 manual "BorderStyle
Property" and specify a proper setting
value.
DropDownStyle property setting value is
not specified in GSet statement. Refer
to GUI Builder 7.0 manual
"DropDownStyle Property" and specify
a proper setting value.
EventTaskType property setting value is
not specified in GSet statement. Refer
to GUI Builder 7.0 manual
"EventTaskType Property" and specify a
proper setting value.
ImageAlign property setting value is not
specified in GSet statement. Refer to
GUI Builder 7.0 manual "ImageAlign
Property" and specify a proper setting
value.
IOType property setting value is not
specified in GSet statement. Refer to
GUI Builder 7.0 manual "IOType
Property" and specify a proper setting
value.
FormBorderStyle property setting value
is not specified in GSet statement.
Refer to GUI Builder 7.0 manual
"FormBorderStyle Property" and specify
a proper setting value.
ScrollBars property setting value is not
specified in GSet statement. Refer to
GUI Builder 7.0 manual "ScrollBars
Property" and specify a proper setting
value.
SizeMode property setting value is not
specified in GSet statement. Refer to
GUI Builder 7.0 manual "SizeMode
Property" and specify a proper setting
value.
Maintenance 9. Troubleshooting
Note 1 Note 2
157