Standard Rs-232C Port; Rs-232C Port; Confirmation With Epson Rc+ 7.0 (Rs-232C) - Epson RC700 Series Original Instructions Manual

12. Standard RS-232C Port

12.1 RS-232C Port

A standard RS-232C port is available with the Controller.
Mount the RS-232C board(s) in the option slot to communicate with external equipment
with two or more RS-232C ports.
For the details of the expansion port, refer to 16.4 RS-232C Board.
Port numbers are assigned as follows.

12.2 Confirmation with EPSON RC+ 7.0 (RS-232C)

When an RS-232C board is mounted in as option unit, the Controller software automatically
identifies the RS-232C board. Therefore, no software configuration is needed. Correct
identification can be confirmed from EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Setup]-[System Configuration] to display the
(2)
RC700 Series Rev.3
Port No.
#1 Standard RS-232C connector
#2 First expansion RS-232C board CH1
#3 First expansion RS-232C board CH2
#4 Second expansion RS-232C board CH1
#5 Second expansion RS-232C board CH2
[System Configuration] dialog.
Select the [RS232]-[CU].
Functions 12. Standard RS-232C Port
Supported hardware
143