Control System Configuration
This manual explains with the following combinations of Controllers and software.
Robot Controller RC90 with the following label attached.
EPSON RC+ 7.0
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible
NOTE
Manual PDF for this robot system is available from EPSON RC+ 7.0 Ver. 7.0.2
NOTE
This option is not available for Robot Controller RC90 (EPSON RC+ 5.0) without the label.
RC90 (EPSON RC+ 7.0) Rev.8
Label
Before Ver.7.0.1
Ver.7.0.2 or later
Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.0.2 or later.
Controller
Software
RC90
EPSON RC+ 7.0
RC90 controller firmware
Ver.7.0.2.0
!!!
OK
vii