Description - HPE 5920 Series Command Reference Manual

Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of
the impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the display this command in interface view to
identify these commands. Then use their undo forms or follow the command reference to
individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
Examples
# Restore the default settings for S-Channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname–S-Channel1/0/1:10] default
# Restore the default settings for S-Channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] default

description

Use description to configure a description for an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The default description for an interface is "interface name Interface." The following table shows
examples of interfaces and their default descriptions:
Interface
S-channel interface S-channel 1/0/1:10
S-channel aggregate interface
Schannel-Aggregation 1:10
VSI S-channel 1/0/1:10.1
VSIaggregate interface
Schannel-Aggregation 1:10.1
Views
S-channel interface view, S-channel aggregate interface view, VSI interface view, VSI aggregate
interface view
Predefined user roles
network-admin
Description
S-channel 1/0/1:10 Interface
Schannel-Aggregation 1:10 Interface
S-channel 1/0/1:10.1 Interface
Schannel-Aggregation 1:10.1 Interface
2