Driver Seat Back Cushion Heater And Passenger Seat Back Cushion Heater Replacement (Non Fold Flat); Driver Seat Back Cushion Heater And Passenger Seat Back Cushion Heater Replacement (Fold Flat) - Suzuki XL7 2007 Service Manual

Driver Seat Back Cushion Heater and Passenger Seat Back Cushion Heater Replacement
(Non Fold Flat)
Callout
Preliminary Procedure
Remove the front seat. Refer to "Front Seat Replacement - Bucket: ".
Front Seat Recliner Handle
1
Tip: Pull firmly forward on the handle to remove.
Front Seat Outer Adjuster Finish Cover
2 Refer to "Front Seat Cushion Outer Trim Panel Replacement (Non Fold Flat): " "Front Seat Cushion
Outer Trim Panel Replacement (Fold Flat): ".
Front Seat Inner Adjuster Finish Panel
3 Refer to "Front Seat Cushion Inner Trim Panel Replacement (Non Fold Flat): " "Front Seat Cushion
Inner Trim Panel Replacement (Fold Flat): ".
Front Seat Head Restraint
4
Refer to "Front Seat Head Restraint Replacement: ".
Front Seat Head Restraint Guides
Tip:
1. Disconnect the lower J-hook retainer from the seat back trim cover.
5
2. Carefully pull up the trim cover, disengaging the hoop and loop retainers, until the headrest guides
are exposed.
3. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back
pad.
Front Seat Back Cushion Cover
6 Refer to "Front Seat Back Cushion Cover and Cushion Pad Replacement (Non Fold Flat): " "Front Seat
Back Cushion Cover and Cushion Pad Replacement (Fold Flat): ".
Front Seat Back Heater Element
7
Tip: Disconnect the electrical connector and gently pull on the heater element to remove the element
from the seat foam. Be careful not to damage the foam pad.
Component Name
Seats: 9G-57