Example: First-Hop Router Configuration - Cisco Nexus 7000 Series Configuration Manual

Example: First-Hop Router Configuration

Example: First-Hop Router Configuration
Figure 3: Sample Topology
The following example shows how to configure the first hop "FH-1a" in the sample topology:
ip lisp etr
lisp dynamic-eid VLAN-11
database-mapping 10.1.1.0/24 172.16.1.2 pr 10 w 50
database-mapping 10.1.1.0/24 172.16.1.3 pr 10 w 50
eid-notify 172.16.0.1 key 3 75095fe9112836e3
map-notify-group 225.1.1.1
lisp dynamic-eid VLAN-12
database-mapping 10.1.2.0/24 172.16.1.2 pr 10 w 50
database-mapping 10.1.2.0/24 172.16.1.3 pr 10 w 50
eid-notify 172.16.0.1 key 3 75095fe9112836e3
map-notify-group 225.1.1.2
interface Vlan11
lisp mobility VLAN-11
lisp extended-subnet-mode
ip address 10.1.1.3/24
ip ospf passive-interface
ip router ospf 100 area 0.0.0.1
hsrp 1
interface Vlan12
lisp mobility VLAN-12
lisp extended-subnet-mode
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
28
ip 10.1.1.1
Configuring LISP ESM Multihop Mobility