First-Hop Security - Cisco Catalyst 4500 Series Software Configuration Manual

About IPv6

First-Hop Security

The following First-Hop Security (FHS) features are supported for IPv6 on the Catalyst 4500-E and -X
series switch:
•
•
•
•
•
•
•
You can find information about these features at this location:
IPv6 First-Hop Security Configuration Guide, Cisco IOS Release 15E
IPv6 First-Hop Security Configuration Guide, Cisco IOS Release XE 3E
QoS
The following QoS features are supported for IPv6 on the Catalyst 4500 series switch:
•
•
•
•
•
You can find information about these features at this location:
QoS: Classification Configuration Guide, Cisco IOS XE Release 3S
Management
The following management features are supported for IPv6 on the Catalyst 4500 series switch:
•
•
•
•
•
•
You can find information about these features at this location:
Network Management Configuration Guide Library, Cisco IOS Release 15E
Network Management Configuration Guide Library, Cisco IOS XE Release 3E
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
63-4
IPv6 RA Guard
IPv6 Source Guard and Prefix Guard
IPv6 Snooping
DHCPv6 Guard
IPv6 Neighbor Discovery Multicast Suppress
IPv6 Destination Guard
IPv6 RFCs
MQC packet classification
MQC traffic shaping
MQC traffic policing
MQC packing marking and remarking
Queueing
Ping
Syslog
Netconf support
SNMP
SOAP
HTTP(s)
Chapter 63 Support for IPv6