Configuring A Login Banner - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
show running-config
Example:
Switch# show running-config
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring a Login Banner

You can configure a login banner to be displayed on all connected terminals. This banner appears after the
MOTD banner and before the login prompt.
Follow these steps to configure a login banner:
SUMMARY STEPS
1. enable
2. configure terminal
3. banner login c message c
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
How to Administer the Switch
1541