Example: Configuring Nvram Buffer Size - Cisco Catalyst 2960 series Configuration Manual

Additional References for Performing Switch Setup

Example: Configuring NVRAM Buffer Size

Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# boot buffersize 600000
Switch(config)# end
Switch# show boot
BOOT path-list
Config file
Private Config file : flash:/private-config.text
Enable Break
Manual Boot
HELPER path-list
Auto upgrade
Auto upgrade path
NVRAM/Config file
Timeout for Config
Config Download
Switch#
Related Topics
Configuring the NVRAM Buffer Size, on page 1579
Additional References for Performing Switch Setup
Related Documents
Related Topic
Switch setup commands
Boot loader commands
USB flash devices
Hardware installation
Platform-independent command references
Platform-independent configuration information
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1586
:
: flash:/config.text
: no
: no
:
: yes
:
buffer size: 600000
Download: 300 seconds
via DHCP: enabled (next boot: enabled)
End with CNTL/Z.
Document Title
Catalyst 2960-X Switch System
Management Command Reference
Catalyst 2960-X Switch Interface
and Hardware Component
Configuration Guide
Catalyst 2960-X Switch Managing
Cisco IOS Image Files
Configuration Guide
Catalyst 2960-X Switch Hardware
Installation Guide
Cisco IOS 15.3M&T Command
References
Cisco IOS 15.3M&T Configuration
Guides