Monitoring Web-Based Authentication Status - Cisco Catalyst 2960 series Configuration Manual

Monitoring Web-Based Authentication Status

Use the commands in this topic to display the web-based authentication settings for all interfaces or for specific
ports.
Table 131: Privileged EXEC show Commands
Command
show authentication sessions method webauth
show authentication sessions interface
type slot/port[details]
Displaying Web-Based Authentication Status
Perform this task to display the web-based authentication settings for all interfaces or for specific ports:
SUMMARY STEPS
1. show authentication sessions {interfacetype/ slot}
DETAILED STEPS
Command or Action
Step 1 show authentication sessions {interfacetype/ slot}
Example:
This example shows how to view only the global web-based
authentication status:
show authentication sessions
Switch#
Example:
This example shows how to view the web-based authentication
settings for gigabit interface 3/27:
show authentication sessions interface gigabitethernet
Switch#
3/27
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Web-Based Authentication
Purpose
Displays the web-based authentication settings for all
interfaces for fastethernet, gigabitethernet, or
tengigabitethernet
Displays the web-based authentication settings for
the specified interface for fastethernet, gigabitethernet,
or tengigabitethernet.
In Session Aware Networking mode, use the show
access-session interface command.
Purpose
Displays the web-based authentication settings.
type = fastethernet, gigabitethernet, or
tengigabitethernet
(Optional) Use the interface keyword to display the
web-based authentication settings for a specific
interface
1447