Monitoring And Maintaining Administration Of The Switch - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Monitoring and Maintaining Administration of the Switch

Command
clear mac address-table dynamic
clear mac address-table dynamic address
mac-address
clear mac address-table dynamic interface
interface-id
clear mac address-table dynamic vlan vlan-id
show clock [detail]
show ip igmp snooping groups
show mac address-table address mac-address
show mac address-table aging-time
show mac address-table count
show mac address-table dynamic
show mac address-table interface interface-name
show mac address-table move update
show mac address-table multicast
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Monitoring and Maintaining Administration of the Switch
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Removes all dynamic entries.
Removes a specific MAC address.
Removes all addresses on the specified physical port
or port channel.
Removes all addresses on a specified VLAN.
Displays the time and date configuration.
Displays the Layer 2 multicast entries for all VLANs
or the specified VLAN.
Displays MAC address table information for the
specified MAC address.
Displays the aging time in all VLANs or the specified
VLAN.
Displays the number of addresses present in all
VLANs or the specified VLAN.
Displays only dynamic MAC address table entries.
Displays the MAC address table information for the
specified interface.
Displays the MAC address table move update
information.
Displays a list of multicast MAC addresses.
1553