Enabling And Disabling Sequence Numbers In Log Messages - Cisco Catalyst 2960 series Configuration Manual

Command or Action
or
Switch(config)# service timestamps log datetime
Step 3
end
Example:
Switch(config)# end

Enabling and Disabling Sequence Numbers in Log Messages

If there is more than one log message with the same time stamp, you can display messages with sequence
numbers to view these messages. By default, sequence numbers in log messages are not displayed.
This task is optional.
SUMMARY STEPS
1. configure terminal
2. service sequence-numbers
3. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2
service sequence-numbers
Example:
Switch(config)# service sequence-numbers
Step 3
end
Example:
Switch(config)# end
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure System Message Logs
Purpose
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Enables sequence numbers.
Returns to privileged EXEC mode.
1605