Monitoring And Maintaining Msdp - Cisco Catalyst 9500 series Configuration Manual

Configuring MSDP
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Monitoring and Maintaining MSDP

Commands that monitor MSDP SA messages, peers, state, and peer status:
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
ip msdp originator-id interface-id
Example:
Device(config)# ip msdp originator-id
0/1
end
Example:
Device(config)# end
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Monitoring and Maintaining MSDP
Purpose
Enables privileged EXEC mode. Enter your
password if prompted.
Enters the global configuration mode.
Configures the RP address in SA messages to
be the address of the originating device
interface.
For interface-id, specify the interface on the
local Device.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the
configuration file.
47