Configuring Summer Time (Daylight Saving Time) - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 4
end
Example:
Switch(config)# end
Step 5 show running-config
Example:
Switch# show running-config
Step 6
copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Configuring Summer Time (Daylight Saving Time)

To configure summer time (daylight saving time) in areas where it starts and ends on a particular day of the
week each year, perform this task:
SUMMARY STEPS
1. enable
2. configure terminal
3. clock summer-time zone date date month year hh:mm date month year hh:mm [offset]]
4. clock summer-time zone recurring [week day month hh:mm week day month hh:mm [offset]]
5. end
6. show running-config
7. copy running-config startup-config
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
• zone—Enters the name of the time zone to be displayed when
standard time is in effect. The default is UTC.
• hours-offset—Enters the hours offset from UTC.
• (Optional) minutes-offset—Enters the minutes offset from
UTC. This available where the local time zone is a percentage
of an hour different from UTC.
How to Administer the Switch
1533