Configuring The Switch For Secure Shell - Cisco 3032 Software Configuration Manual

Chapter 7 Configuring Switch-Based Authentication
Command
Step 7
end
Step 8 show running-config
Step 9 copy running-config startup-config
To disable AAA, use the no aaa new-model global configuration command. To disable authorization,
use the no aaa authorization {network | exec} method1 global configuration command.
To secure the switch for HTTP access by using AAA methods, you must configure the switch with the
Note
ip http authentication aaa global configuration command. Configuring AAA authentication does not
secure the switch for HTTP access by using AAA methods.
For more information about the ip http authentication command, see the Cisco IOS Security Command
Reference, Release 12.2.

Configuring the Switch for Secure Shell

This section describes how to configure the Secure Shell (SSH) feature. To use this feature, you must
install the cryptographic (encrypted) software image on your switch. You can download the
cryptographic software image from
for this release.
These sections contain this information:
•
•
•
For SSH configuration examples, see the "SSH Configuration Examples" section in the "Configuring
Secure Shell" chapter of the Cisco IOS Security Configuration Guide, Cisco IOS Release 12.2, at
this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter0918
6a00800ca7d5.html
For complete syntax and usage information for the commands used in this section, see the command
Note
reference for this release and the command reference for Cisco IOS Release 12.2 at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_reference_book09186a
0080087e33.html
OL-12247-04
Purpose
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Understanding SSH, page 7-46
Configuring SSH, page 7-47
Displaying the SSH Configuration and Status, page 7-50
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
www.dell.com/support. For more information, see the release notes
Configuring the Switch for Secure Shell
7-45