Modifying A Vlan Interface - HP 1910 User Manual

Hp 1910 gigabit ethernet switch series
Hide thumbs Also See for 1910:
Table of Contents

Advertisement

Item
Configure
IPv6 Link
Local
Address

Modifying a VLAN interface

By modifying a VLAN interface, you can assign an IPv4 address, an IPv6 link-local address, and an IPv6
site-local address, or global unicast address to the VLAN interface, and shut down or bring up the VLAN
interface.
To modify a VLAN interface:
1.
Select Network > VLAN Interface from the navigation tree.
2.
Click the Modify tab to enter the page for modifying a VLAN interface.
Figure 152 Modifying a VLAN interface
3.
Modify a VLAN interface as described in
4.
Click Apply.
Description
Configure the way in which the VLAN interface obtains an IPv6
Auto
link-local address.
Select the Auto or Manual option:
Auto—The device automatically assigns a link-local address for
the VLAN interface based on the link-local address prefix
Manual
(FE80::/64) and the link-layer address of the VLAN interface.
Manual—Requires manual assignment.
Configure an IPv6 link-local address for the VLAN interface.
IPv6
This field is available after you select the Manual option. The prefix of
Address
the IPv6 link-local address you enter must be FE80::/64.
Table
44.
164
These items
are available
after you
select the
Configure
IPv6 Link
Local
Address box.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents