Modifying A Vlan Interface - HP V1910 Switch Series User Manual

Figure 134 The Create tab
Table 56 Configuration items of creating a VLAN interface
Item
Input a VLAN ID:
Configure
Primary IPv4
Address
Return to VLAN interface configuration task

Modifying a VLAN interface

NOTE:
After you modify the IPv4 address for a selected VLAN interface on the page for modifying VLAN
interfaces, click the Apply button to submit the modification.
After you change the IP address of the VLAN interface you are using to log in to the device, you will be
disconnected from the device. You can use the changed IP address to re-log in.
Select Network > VLAN Interface from the navigation tree and click the Modify tab to enter the page
shown in Figure
Description
Input the ID of the VLAN interface to be created. Before creating a VLAN
interface, make sure that the corresponding VLAN exists.
DHCP Configure the way in which the VLAN interface obtains an IPv4 address.
Allow the VLAN interface to automatically obtain an IP address by selecting
BOOTP
the DHCP or BOOTP option, or manually assign the VLAN interface an IP
Manual
address by selecting the Manual option.
Configure an IPv4 address for the VLAN interface.
IPv4 Address
This option is available after you select the Manual option.
Select the subnet mask length.
Mask Length
This option is available after you select the Manual option.
135.
list.
147