The D18 Functions Have Been Expanded, See "D18 – Reading System Data - HEIDENHAIN TNC 620 User Manual

TNC model, software and features
New functions 81760x-03
Manual probe functions create a completely new line in the
preset table, see "Writing measured values from the touch
probe cycles to the preset table", page 520
Manual probe functions can write in a password-protected line,
see "Recording measured values from the touch probe cycles",
page 518
The column AFC-LOAD was added to the tool table. In this
column you can set a tool-dependent standard reference
power for the adaptive feed control AFC, which you establish
once with a teach-in cut, see "Enter tool data into the table",
page 200
The column KINEMATIC has been added to the tool table, see
"Enter tool data into the table", page 200
When importing tool data the CSV file may contain additional
table columns not recognized by the control. During import a
message is displayed indicating the unrecognized columns and
informing that these values will not be adopted, see "Import and
export tool data", page 231
New function FUNCTION S-PULSE for programming pulsing
shaft speeds, see "Pulsing spindle speed FUNCTION S-PULSE",
page 428
It is possible to search quickly for a file in file management by
entering the first letter, see "Selecting drives, directories and
files", page 144
With active structuring the structure block can be edited in the
structure window, see "Definition and applications", page 172
The D18 functions have been expanded, see "D18 – Reading
system data", page 347
The control differentiates between interrupted or stopped NC
programs. In the interrupted status, the control offers more
intervention options, see "Interrupt, stop or abort machining",
page 573
Animated help can be selected with the tilt working plane
function, see "Overview", page 436
The software option number 42 DXF Converter now also
produces CR circles, see "Basic settings", page 290
19
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016