HEIDENHAIN TNC 620 User Manual page 365

Reading system data
With the function SYSSTR you can read system data and store
them in string parameters. You select the system data through a
group number (ID) and a number.
Entering IDX and DAT is not required.
Group name, ID no.
Program information, 10010
Channel data, 10025
Values programmed in the tool
call, 10060
Touch-probe data, 10350
Data for pallet machining,
10510
NC software version, 10630
Tool data, 10950
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Number Meaning
1 Path of the current main program
Path of the cycle selected with CYCL DEF G39 PGM
3
CALL
Path of the program selected with %:PGM
10
1 Channel name
1 Tool name
50 Probe type of the active touch probe TS
70 Probe type of the active touch probe TT
73 Key name of the active touch probe TT from MP
activeTT
1 Pallet name
2 Path of the selected pallet table
10 Version identifier of the NC software version
1 Tool name
2 DOC entry of the tool
3 AFC control setting
4 Tool-carrier kinematics
String parameters 9.10
9
365