HEIDENHAIN TNC 620 User Manual page 10

Fundamentals
TNC model, software and features
Remote Desktop Manager
Remote operation of external
computer units
Cross Talk Compensation – CTC
Compensation of axis couplings
Position Adaptive Control – PAC
Adaptive position control
Load Adaptive Control – LAC
Adaptive load control
Active Chatter Control – ACC
Active chatter control
Active Vibration Damping – AVD
Active vibration damping
10
(option 133)
Windows on a separate computer unit
Incorporated in the TNC interface
(option number 141)
Determination of dynamically caused position deviation through axis
acceleration
Compensation of the TCP (Tool Center Point)
(option 142)
Changing of the control parameters depending on the position of
the axes in the working space
Changing of the control parameters depending on the speed or
acceleration of an axis
(option 143)
Automatic determination of workpiece weight and frictional forces
Changing of control parameters depending on the actual mass of
the workpiece
(option number 145)
Fully automatic function for chatter control during machining
(option number 146)
Damping of machine oscillations to improve the workpiece surface
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016