HEIDENHAIN TNC 620 User Manual page 345

Hide thumbs Also See for TNC 620:

Table of Contents

In the part program, program D16 to activate the output:

N90 D16 P01 TNC:\MASK\MASK1.A/ TNC:\PROT1.TXT

The TNC then creates the file PROT1.TXT:

MEASURING LOG OF IMPELLER CENTER OF GRAVITY

DATE: July 15, 2015

TIME: 8:56:34 AM

NO. OF MEASURED VALUES : = 1

X1 = 149.360

If you output the same file more than once in the

program, the TNC appends all texts to the end of the

texts already output within the target file.

If you use D16 more than once in the program, the

TNC saves all texts in the file that you defined in the

D16 function. The file is not output until the TNC

reads the block, or you press the NC STOP key, or

you close the file with .

In the D16 block, program the format file and the log

file with their respective file type extensions

If you enter only the file name for the path of the

log file, the TNC saves the log file in the directory

in which the NC program with the D16 function is

In machine parameters (no. 102202) and (no. 102203)

you can define a default path for outputting log files.

If you use D16 the file must not be UTF8-encoded.

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Additional functions

Chapters

Table of Contents