HEIDENHAIN TNC 620 User Manual page 232

5
Tools
5.4 Tool management (option number 93)
The CSV file to be imported must be stored in the
TNC:\system\tooltab directory.
If you import the tool data of tools whose
numbers are in the pocket table, the TNC issues
an error message. You can then decide whether
you want to skip this data record or insert a new
tool. The TNC inserts a new tool into the first
empty line of the tool table.
If the imported CSV file includes additional table
columns unknown to the control, a message is
displayed during import specifying these unknown
columns and indicating that these values will not
be adopted.
Make sure that the column designations have
been specified correctly.
Further Information:
table", page 200
You can import any tool data, the associated data
record does not have to contain all the columns
(or data) of the tool table.
The column names can be in any order, the data
must be defined in the corresponding order.
Sample import file:
T,L,R,DL,DR
4,125.995,7.995,0,0
9,25.06,12.01,0,0
28,196.981,35,0,0
232
"Enter tool data into the
Line 1 with column names
Line 2 with tool data
Line 3 with tool data
Line 4 with tool data
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016