Accessories: HEIDENHAIN 3-D touch probes and electronic
HR electronic handwheels
Electronic handwheels facilitate moving the axis slides precisely
by hand. A wide range of traverses per handwheel revolution is
available. Apart from the HR130 and HR150 integral handwheels,
HEIDENHAIN also offers the HR 410, HR 520 and HR 550FS
portable handwheels.
Several electronic handwheels can also be
connected simultaneously and used alternatively
on controls with the (HSCI: HEIDENHAIN Serial
Controller Interface) serial interface for control
components.
Configuration is performed via the machine tool
builder.
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
2.7
handwheels
109
2