HEIDENHAIN TNC 620 User Manual page 629

Parameter settings
DisplaySettings
Behavior with control start-up
Acknowledge "Power interrupted" message
TRUE: Control start-up is not continued until the message has been acknowledged
FALSE: "Power interrupted" message not displayed
DisplaySettings
Display mode for time display
Selection for display mode in the time display
Analog
Digital
Logo
Analog and Logo
Digital and Logo
Analog on Logo
Digital on Logo
DisplaySettings
Link row On/Off
Display setting for link row
OFF: Deactivate the information line in the operating mode line
ON: Activate the information line in the operating mode line
DisplaySettings
Settings for 3-D display
Model type of 3-D display
3-D (compute-intensive): Model display for complex machining operations with
undercuts
2.5-D: Model display for 3-axis machining operations
No Model: Model display is disabled
Model quality of the 3-D display
very high: High resolution; Block end points can be displayed
high: High resolution
medium: Medium resolution
low: Low resolution
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Machine-specific user parameters 18.1
18
629