HEIDENHAIN TNC 620 User Manual page 214

Hide thumbs Also See for TNC 620:

Table of Contents

If you open a pop-up window for tool selection, the

TNC marks all tools available in the tool magazine

You can also search for a tool in the pop-up window.

To do so, press the GOTO or FIND soft key and enter

the tool number or tool name. With the OK soft key

you can load the tool into the dialog box.

Example: Tool call

Call tool number 5 in the tool axis Z with a spindle speed 2500 rpm

and a feed rate of 350 mm/min. The tool length and tool radius 2

are to be programmed with an oversize of 0.2 and 0.05 mm, the

tool radius with an undersize of 1 mm.

N20 T 5.2 G17 S2500 DL+0.2 DR-1*

The character D preceding L, R and R2 designates delta values.

Preselection of tools

The preselection of tools with G51 can vary

depending on the individual machine. Refer to your

machine manual.

If you are working with tool tables, use a G51 block to preselect

the next tool. Simply enter the tool number or a corresponding Q

parameter, or type the tool name in quotation marks.

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Chapters

Table of Contents