HEIDENHAIN TNC 620 User Manual page 478

13
Pallet management
13.1 Pallet management (option number 22)
Selecting pallet table
Select file manager in Programming mode or the Program Run
operating modes: Press the PGM MGT key
Display type .P files: Press the SELECT TYPE soft key and SHOW
ALL soft key
Select a pallet table with the arrow keys, or enter a new file
name to create a new table
Confirm your entry with the ENT key
Use the screen layout key to switch between table
view and list view
Exit pallet table
To call the file manager, press the PGM MGT key
To select a different type of file, press the SELECT TYPE soft key
and the soft key for the desired file type, e.g.SHOW .I
Select the desired file
Processing pallet table
MP7683 defines whether the pallet table is to be
executed blockwise or continuously.
In the Program run, full sequence or Program run, single
block operating mode, select the file manager: Press the PGM
MGT key
Display all type .P files: Press the SELECT TYPE and SHOW .P
soft keys
Select a pallet table with the arrow keys
Press the ENT key
Execute the pallet table: Press the NC START key
478
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016