HEIDENHAIN TNC 620 User Manual page 200

Hide thumbs Also See for TNC 620:

Table of Contents

Enter tool data into the table

You can define and store up to 767 tools and their tool data in a tool

table. Also see the editing functions later in this chapter. In order to

be able to assign various compensation data to a tool(indexing the

tool number), insert a line and extend the tool number by a dot and

a number from 1 to 9 (e.g. T 5.2).

You must use tool tables if:

you wish to use indexed tools such as stepped drills with more

than one length compensation value

your machine tool has an automatic tool changer

If you want to work with the machining cycle G122,

Further information:

If you want to work with machining Cycles 251 to 254,

Further information:

if you create or manage further tool tables, the file

name has to start with a letter.

You can select either list view or form view for tables

via the "Screen layout" key.

when you open the tool table you can also change its

Cycle Programming User's Manual

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Chapters

Table of Contents