HEIDENHAIN TNC 620 User Manual page 618

Hide thumbs Also See for TNC 620:

Table of Contents

MOD Functions

17.13 Configuring the HR 550FS wireless handwheel

Configuring the HR 550FS wireless

Press the SET UP WIRELESS HANDWHEEL soft key to configurethe

HR 550FS wireless handwheel. The following functions are

Assigning the handwheel to a specific handwheel holder

Setting the transmission channel

Analyzing the frequency spectrum for determining the optimum

transmission channel

Select transmitter power

Statistical information on the transmission quality

Assigning the handwheel to a specific handwheel

Make sure that the handwheel holder is connected to the

control hardware.

Place the wireless handwheel you want to assign to the

handwheel holder in the handwheel holder

Press the MOD key to select the MOD function

Select the Machine settings menu

Select the configuration menu for the wireless handwheel:

Press the SET UP WIRELESS HANDWHEEL soft key

Click the Connect HW button: The TNC saves the serial number

of the wireless handwheel located in the handwheel holder and

shows it in the configuration window to the left of the Connect

To save the configuration and exit the configuration menu, press

the END button