HEIDENHAIN TNC 620 User Manual page 594

17
MOD Functions
17.2 Graphic settings
17.2 Graphic settings
With the MOD function Graphic settings you can select the model
type and model quality .
To select Graphic settings proceed as follows:
Select the group Graphic settings from the MOD menu
Select the model type
Select the model quality
Press the APPLY soft key
Press the OK soft key.
You have the following simulation parameters for the graphic settings:
Model type
Displayed
symbol
Model quality
Displayed
symbol
594
Choice Properties
3-D Very true to detail,
heavy time and processor
consumption
2.5 D Fast
No model Very fast
Choice Properties
Very high High data transfer rate, exact depiction of tool geometry,
depiction of block end points and block numbers possible
High High data transfer rate, exact depiction of tool geometry
Medium Medium data transfer rate, approximation of tool geometry
Low Low data transfer rate, coarse approximation of tool geometry
Application
Milling with undercuts,
milling-turning operations
Milling without undercuts
Line graphics
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016