HEIDENHAIN TNC 620 User Manual page 163

Hide thumbs Also See for TNC 620:

Table of Contents

The TNC in a network

You must connect the Ethernet card to the network.

Further Information:

The TNC logs error messages during network

Further Information:

If the TNC is connected to a network, the left directory window

displays additional drives. All the functions described above

(selecting a drive, copying files, etc.) also apply to network drives,

provided that you have been granted the corresponding rights.

Connecting and disconnecting a network drive

To call the file manager, press the PGM MGT key

Select network settings: Press the NET soft key

(soft-key row 2)

To manage the network drives: Press the DEFINE

NETWORK CONNECTN. soft key. In a window

the TNC shows the network drives available for

access. With the soft keys described below you

can define the connection for each drive.

Establish the network connection. If the

connection is active, the TNC marks the Mount

End network connection

Automatically establish network connection

whenever the TNC is switched on. The TNC

marks the Auto column if the connection is

established automatically

Set up new network connection

Delete existing network connection

Copy network connection

Edit network connection

Delete the status window

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Working with the file manager

"Ethernet interface ",

Chapters

Table of Contents