HEIDENHAIN TNC 620 User Manual page 87

Overview
The Overview status form is displayed by the TNC following TNC
switch-on if you selected the screen layout PROGRAM + STATUS (or
POSITION + STATUS). The overview form contains a summary of
the most important status information, which you can also find on
the various detail forms.
Soft key Meaning
Position display
Tool information
Active M functions
Active coordinate transformations
Active subprogram
Active program section repeat
Program called with %
Current machining time
Name and path of the active main program
General program information (PGM tab)
Soft key Meaning
No direct Name and path of the active main program
selection
possible
Circle center CC (pole)
Dwell time counter
Machining time when the program was
completely simulated in the Test run operating
mode
Current machining time in percent
Current time
Active programs
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Status displays
2
2.4
87