HEIDENHAIN TNC 620 User Manual page 558

16
Test Run and Program Run
16.1 Graphics (option 20)
Overview: Display modes
In operating modes Program run, single block and Program
run, full sequence and in the operating mode Test run the TNC
displays the following soft keys:
Soft key
The position of the soft keys depends on the
selected operating mode.
The Test run mode of operation also offers the following views:
Soft key
Limitations during program run
The result of the simulation can be faulty if the TNC's
computer is overloaded with complicated processing
tasks.
3-D view
Choose 3-D view:
The high-resolution 3-D view enables you to display the surface of
the machined workpiece in greater detail. With a simulated light
source, the TNC creates realistic light and shadow conditions.
Press the 3-D view soft key
558
View
Plan view
Projection in three planes
3-D view
View
Volume view
Volume view and tool paths
Tool paths
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016