HEIDENHAIN TNC 620 User Manual page 437

The PLANE function: Tilting the working plane (software option 8) 12.2
Defining the PLANE function
Show the soft-key row with special functions
Select the PLANE function: Press the TILT
MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row
Selecting functions
Select the desired function by soft key. The control continues
the dialog and requests the required parameters
Selecting the function while animation is active
Select the function using the soft key: Control shows the
animation
To confirm the currently active function: Press the function's
soft key again or press the ENT key
Position display
As soon as a PLANE function except PLANE AXIAL is active, the
TNC shows the calculated spatial angle in the additional status
display.
In the Distance-To-Go mode (ACTDST and REFDST) the TNC shows
during tilting (MOVE or TURN mode) in the rotary axis the distance
to go (or calculated distance) to the final position of the rotary axis.
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
12
437