HEIDENHAIN TNC 620 User Manual page 356

9
Programming Q parameters
9.8 Additional functions
D29 – Transfer values to the PLC
This function may only be used with the permission
of your machine tool builder.
The D29 function transfers up to eight numerical values or Q
parameters to the PLC.
D37 – EXPORT
This function may only be used with the permission
of your machine tool builder.
You need the D37 function if you want to create your own cycles
and integrate them in the TNC.
D38 – Send information from NC program
The function D38 enables you to write texts and Q parameter
values to the log from the NC program and send to a DNC
application.
Data transmission is through a standard TCP/IP computer network.
For more detailed information, consult the Remo
Tools SDK manual.
Example
Document values from Q1 and Q23 in the log.
D38* /"Q PARAMETER Q1: %F Q23: %F" P02 +Q1 P02 +Q23*
356
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016