HEIDENHAIN TNC 620 User Manual page 486

14
Manual Operation and Setup
14.2 Moving the machine axes
Incremental jog positioning
With incremental jog positioning you can move a machine axis by a
preset distance.
Operating mode: Press the MANUAL OPERATION
or ELECTRONIC HANDWHEEL key
Shift the soft-key row
Select incremental jog positioning: Switch the
INCREMENT soft key to ON
Enter the infeed of the linear axes and confirm
with the CONFIRM VALUE soft key
Alternatively, confirm with the ENT key
Use the arrow keys to position the cursor on the
rotary axis
Enter the infeed of the rotary axes and confirm
with the CONFIRM VALUE soft key
Alternatively, confirm with the ENT key
Confirm with the OK soft key
The increment is active.
Deactivate incremental jog positioning: Switch the
INCREMENT soft key to OFF
If you are in the increment menu, you can switch off
incremental jog positioning with the SWITCH OFF
soft key.
The maximum permissible value for infeed is 10 mm.
486
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016