HEIDENHAIN TNC 620 User Manual page 344

9
Programming Q parameters
9.8 Additional functions
Keyword
L_SLOVENIAN
L_NORWEGIAN
L_ROMANIAN
L_SLOVAK
L_TURKISH
L_ALL
HOUR
MIN
SEC
DAY
MONTH
STR_MONTH
YEAR2
YEAR4
Creating a text file
To output the formatted texts and Q-parameter values, create a
text file with the TNC's text editor. In this file you then define the
output format and Q parameters you want to output. Create this
file with the extension .A.
Example of a text file to define the output format:
"MEASURING LOG OF IMPELLER CENTER OF GRAVITY";
"DATUM: %02d.%02d.%04d",DAY,MONTH,YEAR4;
"TIME: %02d:%02d:%02d",HOUR,MIN,SEC;
"NO. OF MEASURED VALUES: = 1";
"X1 = %9.3F", Q31;
"Y1 = %9.3F", Q32;
"Z1 = %9.3F", Q33;
344
Function
Outputs text only for Slovenian
conversational language
Outputs text only for Norwegian
conversational language
Outputs text only for Rumanian
conversational language
Outputs text only for Slovak conversational
language
Outputs text only for Turkish conversational
language
Display text independently of the
conversational language
Number of hours from the real-time clock
Number of minutes from the real-time clock
Number of seconds from the real-time clock
Day from the real-time clock
Month as a number from the real-time clock
Month as a string abbreviation from the
real-time clock
Two-digit year from the real-time clock
Four-digit year from the real-time clock
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016