Programs With .Hu And .Hc Extensions Can Be Selected And - HEIDENHAIN TNC 620 User Manual

Fundamentals
TNC model, software and features
New functions 81760x-02

Programs with .HU and .HC extensions can be selected and

processed in all operating modes
The functions SELECT PROGRAM and CALL SELECTED
PROGRAM have been introduced, see "Calling any program as a
subprogram", page 313
New FEED DWELL function for programming repeating dwell
times, see "Dwell time FUNCTION FEED", page 430
The control automatically writes upper case letters at the start
of a block, see "Programming path functions", page 252
The D18 functions have been expanded, see "D18 – Reading
system data", page 347
USB data carriers can be locked with the SELinux security
software, see "SELinux security software", page 98
The machine parameter posAfterContPocket (no. 201007) that
influences positioning after an SL cycle has been introduced,
see "Machine-specific user parameters", page 624
Protective zones can be defined in the MOD menu, see
"Entering traverse limits", page 597
Write protection is possible for single lines in the preset table,
see "Saving the datums in the preset table", page 504
New manual probing function for aligning a plane, see
"Measuring 3-D basic rotation", page 531
New function for aligning the machining plane without
rotary axes, see "Tilt the working plane without rotary axes",
page 458
CAD files can be opened without option number 42, see "CAD
viewer", page 287
New software option number 93 Extended Tool
Management,see "Calling tool management", page 225
16
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016