HEIDENHAIN TNC 620 User Manual page 201

Tool table: Standard tool data
Abbr. Inputs
T
Number by which the tool is called in the program (e.g. 5,
indexed: 5.2).
NAME
Name by which the tool is called in the program (max.
32characters, all capitals, no spaces)
L
Compensation value for tool length L
R
Compensation value for the tool radius R
R2
Tool radius R2 for toroid cutters (only for 3-D radius
compensation or graphical representation of a machining
operation with spherical or toroid cutters)
DL
Delta value for tool length L
DR
Delta value for tool radius R
DR2
Delta value for tool radius R2
TL
Set tool lock (TL for ToolLocked
RT
Number of a replacement tool – if available –
asreplacement tool (RT: for ReplacementTool)
An empty field or input 0 means no replacement tool has
been defined.
TIME1
Maximum tool life in minutes. This function can vary
depending on the individual machine tool. Your machine
manual provides more information
TIME2
Maximum tool life in minutes during a tool call: If the
current tool age reaches or exceeds this value, the TNC
inserts the replacement tool during the next T block
CUR_TIME
Current age of the tool in minutes: The TNC automatically
counts the current tool life (CUR_TIME: For CURrentTIME)
A starting value can be entered for used tools
TYPE
Tool type: Press the ENT key to edit the field; the GOTO
key opens a window in which you can select the tool
type. You can assign tool types to specify the display filter
settings such that only the selected type is visible in the
table
DOC
Comment on tool (max. 32 characters)
PLC
Information on this tool that is to be sent to the PLC
LCUTS
Tooth length of the tool for Cycle 22
ANGLE
Maximum plunge angle of the tool for reciprocating
plunge-cut in Cycles 22 and 208
NMAX
Limit the spindle speed for this tool. The programmed
value is monitored (error message) as well as an increase
in the shaft speed via the potentiometer. Function
inactive: Enter –.
range: 0 to +999, if function not active: enter –
Input
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Tool data
Dialog
-
Tool name?
Tool length?
Tool radius?
Tool radius 2?
Tool length oversize?
Tool radius oversize?
Tool radius oversize 2?
Tool locked? Yes=ENT/
No=NOENT
Replacement tool?
Maximum tool age?
Max. tool age for TOOL CALL?
Current tool age?
Tool type?
Tool description
PLC status?
Tooth length in the tool axis?
Maximum plunge angle?
Maximum speed [rpm]
5
5.2
201