HEIDENHAIN TNC 620 User Manual page 560

16
Test Run and Program Run
16.1 Graphics (option 20)
3-D view in the Test Run operating mode
The Test run mode of operation also offers the following views:
Soft keys
The Test run mode of operation also offers the following functions:
Soft keys
Note that the range of functions depends on the
model quality selected. You can select the model
quality in the MOD function Graphic settings.
560
Function
Volume view
Volume view and tool paths
Tool paths
Function
Show workpiece blank frame
Highlight workpiece edges on 3-D model
Show a transparent workpiece
Show the end points of the tool paths
Show the block numbers of the tool paths
Show the workpiece in color
Reset the volume model
Reset the tool paths
Display the rapid traverse movements
Activate measuring
If measuring is activated, the control shows the
corresponding coordinates in close proximity
if you position the mouse cursor on the 3-D
graphics of the workpiece.
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016