HEIDENHAIN TNC 620 User Manual page 185

Hide thumbs Also See for TNC 620:

Table of Contents

Clearing errors

Clearing errors outside of the error window

Clear the errors/messages in the header: Press

In certain situations you cannot use the CE key for

deleting the errors because the key is used for other

Deleting errors

Open the error window

Clear individual errors: Position the cursor on the

error message and press the DELETE soft key.

Delete all error messages: Press the DELETE ALL

If the cause of the error has not been corrected for

that error it cannot be deleted. In this case, the error

message remains in the window.

The TNC stores errors occurred and important events (e.g. system

start) in an error log. The capacity of the error log is limited. If the

log is full, the TNC uses a second file. If this is also full, the first

error log is deleted and newly written etc. If required, switch from

CURRENT FILE to PREVIOUS FILE to view the history.

Open the error window.

Press the LOG FILES soft key.

Open the error log file: Press the ERROR LOG soft

Set the previous error log if required: Press the

PREVIOUS FILE soft key.

Set the current error log if required: Press the

CURRENT FILE soft key.

The oldest entry is at the beginning of the log file, and the most

recent entry is at the end.

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Error messages

Chapters

Table of Contents