HEIDENHAIN TNC 620 User Manual page 585

Block scan in a point table
If you start in a point table called by the main program, use the
ADVANCED soft key.
Press the BLOCK SCAN soft key
The control shows a pop-up window.
Press the ADVANCED soft key
The control expands the pop-up window.
Point number = enter the line number of the point
table you start with
Point file = Enter the name and path of the point
table
Press the NC START key
Block scan in pallet programs
With the pallet management (option 22) you can also use the
BLOCK SCAN function in conjunction with pallet tables.
If you interrupt the processing of pallet tables, the control always
suggests the previously selected NC block of the interrupted NC
program for the BLOCK SCAN function.
For BLOCK SCAN in pallet tables you also define the
input fieldPallet line =. The input refers to the line in
the NR pallet table. This input is always required as
an NC program may appear several times in a pallet
table.
Press the BLOCK SCAN soft key
The control shows a pop-up window.
Pallet line = Enter the line number of the pallet
table
Enter Repetitions = if the NC block is located
within a program section repetition
Press the NC START key
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Program run 16.5
585
16