HEIDENHAIN TNC 620 User Manual page 184

4
Programming aids
4.8 Error messages
Detailed error messages
The TNC displays possible causes of the error and suggestions for
solving the problem:
Open the error window
Information on the error cause and corrective
action: Position the cursor on the error message
and press the MORE INFO soft key. The TNC
opens a window with information on the error
cause and corrective action.
Leave Info: Press the MORE INFO soft key again
Soft key: INTERNAL INFO
The INTERNAL INFO soft key supplies information on the error
message. This information is only required if servicing is needed.
Open the error window
Detailed information about the error message:
Position the cursor on the error message and
press the INTERNAL INFO soft key. The TNC
opens a window with internal information about
the error
To exit Details, press the INTERNAL INFO soft key
again
Soft key FILTER
The FILTER soft key enables you to filter identical warnings listed
immediately in succession.
Open the error window
Press the MORE FUNCTIONS soft key
Press the FILTER soft key The control filters the
identical warnings
Leave Filter: Press the GO BACK soft key
184
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016