HEIDENHAIN TNC 620 User Manual page 564

16
Test Run and Program Run
16.1 Graphics (option 20)
Repeating graphic simulation
A part program can be graphically simulated as often as desired. To
do so you can reset the graphic to the workpiece blank.
Soft key
Tool display
Regardless of the operating mode, you can also show the tool
during the simulation.
Soft key
564
Function
Display unmachined blank in the operating
modes Program run, single block and
Program run, full sequence
Display unmachined blank in the operating
mode Test run
Function
Program run, full sequence / Program run,
single block
Test run
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016