HEIDENHAIN TNC 620 User Manual page 452

12
Multiple axismachining
12.2 The PLANE function: Tilting the working plane (software option 8)
Note:
If the tool is already at the given distance to the
workpiece before positioning, then relatively
speaking the tool is at the same position after
positioning (see figure at center right,
If the tool is not at the given distance to the
workpiece before positioning, then relatively
speaking the tool is offset from the original
position after positioning (see figure at bottom
right,
Feed rate? F=: Contour speed at which the tool should be
positioned
Retraction length in the tool axis?: Retraction path MB is
effective incrementally from the current tool position in the
active tool axis direction that the TNC approaches
tilting. MB MAX positions the tool just before the software limit
switch.
452
1 = DIST)
1 = DIST)
before
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016