HEIDENHAIN TNC 620 User Manual page 607

Setting the operating mode of the external device
(fileSystem)
In the FE2 and FEX operating modes you cannot use
the "load all programs", "load offered program" and
"load directory" functions.
Icon External device
PC with HEIDENHAIN TNCremo data
transfer software
HEIDENHAIN floppy disk units
Non-HEIDENHAIN devices such as
printers, scanners, punchers, PC
without TNCremo
Software for data transfer
For transmitting files to and from the TNC, we recommend using
the HEIDENHAIN TNCremo data transmission software. With
TNCremo, data transmission is possible with all HEIDENHAIN
controls via the serial interface or the Ethernet interface.
You can download the current version of
TNCremofree of charge from the HEIDENHAIN
Filebase (www.heidenhain.com, <Software>, <PC
software>, <TNCremo>).
System requirements for TNCremo:
PC with 486 processor or higher
Windows XP , Windows Vista, Windows 7 , Windows 8 operating
system
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP .EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremo under Windows
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Setting up data interfaces 17.10
Operating
mode
LSV2
FE1
FEX
17
607