HEIDENHAIN TNC 620 User Manual page 228

Hide thumbs Also See for TNC 620:

Table of Contents

Tool management (option number 93)

Editing with active form view

If the form view is active, the following functions are available to

Editing functions, form view

Select the tool data of the previous tool

Select the tool data of the next tool

Select previous tool index (only active if indexing is

Select the next tool index (only active if indexing is

Discard all changes made since the form was called

Add tool index

Delete tool index

Copy the tool data of the selected tool

Insert the copied tool data in the selected tool

Deleting marked tool data

Using this function you can simply delete tool data that you no

longer need.

Follow the steps outlined below for deleting:

In the tool management you use the arrow keys or mouse to

mark the tool data that you wish to delete

Select the DELETE MARKED TOOLS soft key and the TNC shows

a pop-up window listing the tool data to be deleted

Press the START soft key to start the delete process: The TNC

shows the status of the delete process in a pop-up window

Terminate the delete process by pressing the END key or soft

The TNC deletes all the data of all the tools

selected. Make sure that you really no longer

need the tool data, because there is no Undo

function available.

You cannot delete the tool data of tools still stored

in the pocket table. First remove the tool from the

HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016

Chapters

Table of Contents