Programs With .Hu And .Hc Extensions Can Be Selected And - HEIDENHAIN TNC 320 User Manual

Fundamentals
TNC model, software and features
New functions 77185x-02

Programs with .HU and .HC extensions can be selected and

processed in all operating modes
The functions SELECT PROGRAM and CALL SELECTED
PROGRAM have been introduced, see "Calling any program as a
subprogram", page 303
New FEED DWELL function for programming repeating dwell
times, see "Dwell time FUNCTION FEED", page 439
The FN18 functions have been expanded, see "FN 18: SYSREAD
– Reading system data", page 338
USB data carriers can be locked with the SELinux security
software, see "SELinux security software", page 94
The machine parameter posAfterContPocket (no. 201007) that
influences positioning after an SL cycle has been introduced,
see "Machine-specific user parameters", page 610
Protective zones can be defined in the MOD menu, see
"Entering traverse limits", page 583
Write protection is possible for single lines in the preset table,
see "Saving the datums in the preset table", page 492
New manual probing function for aligning a plane, see
"Measuring 3-D basic rotation", page 519
New function for aligning the machining plane without
rotary axes, see "Tilt the working plane without rotary axes",
page 468
CAD files can be opened without option number 42, see "CAD
viewer", page 277
New software option number 93 Extended Tool
Management,see "Calling tool management", page 213
14
HEIDENHAIN | TNC 320 | Conversational Programming User's Manual | 9/2016