Show Qos - Cisco Catalyst 4500 Series Configuration Manual

show qos

show qos
To display QoS information, use the show qos command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
This command is not supported on Supervisor Engine 6-E, Supervisor Engine 6L-E, Catalyst 4900M,
Catalyst 4948E, and Catalyst 4948E-F.
Examples The following example shows the output that might be displayed if you do not enter any keywords:
Switch# show qos
QoS is enabled globally
Switch#
Related Commands Command
qos account layer-all encapsulation
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-944
show qos
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Globally enables QoS functionality on the switch.
Chapter 2
OL-30934-01